EasyManua.ls Logo

Honeywell OMNI 624 - Page 46

Honeywell OMNI 624
112 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
OMNI624 Installation and Setup Guide
6–8
INSTALLER MODE 8 (INSTALLER UNATTENDED DOWNLOAD)
For UL installations, Installer Unattended Download may NOT be used.
The control panel dials (up to 8 times) the telephone number of the CS Downloading Computer without
the need to have the operator present. The CS Downloading computer telephone number (Question 01)
and an unattended identification number (Question 02) in the Downloader Software will be
programmed into dedicated memory locations.
Unattended download requires the following sequence:
NOTE: Prior to entering this mode, the PC operator must know the unattended identification number
for each panel to be downloaded and modem phone number for the CS Downloading computer.
1. The PC operator must select UNATTENDED DOWNLOAD in the Downloader Software Main
Menu.
2. Enter unattended download mode: [CODE] + [] + Installer Code + [8].
3. The system will now enter keypad programming, Question 01. Enter the telephone number of the
central station downloading computer (each digit followed by the [#] key; e.g., [1] [#] [2] [#] [3] [#]
etc.) into this question (20 digits max). This phone number should be the same as the CS callback
number (Question 03 from keypad programming if the panel is programmed for callback).
4. Press the [INSTANT] key to proceed to Question 02. Next, enter the desired unattended
identification number (each digit followed by the [#] key). This will be used by the Compass software
in the CS downloading computer to determine the proper account information to download to this
subscriber. The unattended identification number must be 12 digits in length. It is the unattended
identification number (not the account number) that will be communicated to the Compass software
in the CS downloading computer. For unattended identification numbers fewer than 12 digits, you
must enter leading 0's to make the number 12 digits long.
Example: for unattended identification number 345, enter 0 # 0 # 0 # 0 # 0 # 0 # 0 # 0 # 0 # 3 # 4 # 5 #
5. Press the [STAY] key to exit programming mode. The control panel will now dial the telephone
number entered into the callback number. The downloading computer must be placed into the
Unattended Communications option from the main menu. Upon connection with the computer, the
system will obtain the unattended identification number programmed in step 4 and perform the
desired download operation.
NOTE: The CS downloading computer must be waiting in the Unattended Communications mode and
preprogrammed with the account information in order for the unattended download to be functional.
U
L
The unattended download mode CANNOT be used in UL installations.
INSTALLER MODE 9 (ON-LINE DOWNLOAD)
In this mode, the installer can initiate a remote communications session with the CS Downloading
computer at the control panel location. Typically, the CS initiates a remote communications session.
On-line Downloading allows the installer to call the office (from the same telephone line as the panel),

Table of Contents

Related product manuals