Why does my Honeywell Barcode Reader have multiple scans when presenting a code?
If there are multiple scans upon presentation of a code with your Honeywell Barcode Reader, the same symbol timeout is likely set too short. Adjust the same symbol timeout for a longer time increment.
Why does my Honeywell Barcode Reader scan the barcode but show no data?
If your Honeywell Barcode Reader scans the bar code but shows no data, the unit may not be configured correctly. Make sure the scanner is configured for the appropriate mode.
Why are characters being dropped by my Honeywell Orbit MS7120?
If characters are being dropped by your Honeywell Barcode Reader, the inter character delay needs to be added to the transmitted output. Add some inter-character delay to the transmitted output by using the MetroSelect Configuration Guide (PN 00-02407).
General| Wavelength | 650 nm |
|---|---|
| Scanner type | 1D |
| Light levels (direct sunlight) | 0 - 4842 lx |
| Bluetooth | No |
| Standard interfaces | USB |
| Input voltage | 5 V |
| Product color | Black |
| Storage temperature (T-T) | -40 - 60 °C |
| Operating temperature (T-T) | 0 - 40 °C |
| Operating relative humidity (H-H) | 5 - 95 % |
| Harmonized System (HS) code | 84716070 |
Weight and Dimensions| Depth | 105 mm |
|---|---|
| Width | 102 mm |
| Height | 150 mm |
| Weight | 400 g |
Instructions for connecting the scanner using RS232 or Light Pen interfaces.
Guide for connecting the scanner via a keyboard wedge interface.
Details the installation process for USB connections.
Outlines specific LED and beep patterns indicating scanner malfunctions.
Shows connector types and pin functions for host-side connections.
Provides crucial safety warnings regarding laser exposure and device usage.
Covers Electromagnetic Compatibility standards and compliance for Class A/B devices.
Provides contact information for technical support across different regions.
To Next Page
