Getting Started | 29
800-21358 - A - 10/2015
Figure 2-2 Network Settings
Upgrading Your Device’s Firmware
Before you begin using your camera, make sure you have the latest firmware installed. You can
upgrade a single device or multiple devices at the same time.
To upgrade a single device:
1. From the list of devices in ConfigTool, click the device that you want to upgrade.
2. Click Login, type the login user name and password for the device (the default user name
is admin and the default password is 1234), and then click OK.
3. On the Config screen, click the Upgrade tab.
4. Click OpenFile, navigate to the directory that contains the firmware file, and then click
Upgrade.
Figure 2-3 Upgrade Screen
To Next Page
Loading...
Need help?
General
