www.honeywell.com/security
30 | Performance Series IP Camera Software Configuration Guide
When the upgrade is complete, the device will reboot. While the device is rebooting, the
message "Device is offline: [device IP address]" appears.
To upgrade multiple devices simultaneously:
1. In ConfigTool, click Batch Mode.
Figure 2-4 Select Batch Mode
2. From the list of devices, click all of the devices that you want to upgrade, and then click
Start.
Figure 2-5 Batch Mode Screen
3. On the Batch Upgrade screen, click Open, navigate to the directory that contains the
firmware file, and then click OK.
To Next Page
Loading...
Need help?
General
