Honeywell Performance H4D3PRV3 User Manual

www.honeywell.com/security
60 | Performance Series IP Camera Software Configuration Guide
Connection
Figure 5-10 Connection Configuration Interface
Table 5-8 Connection Configurations
Parameter Function
Max Connection This shows the maximum number of network connections for the same
camera. The value ranges from 1 to 20. The maximum number of
connections is 20.
TCP Port The default setting is 37777. You can modify this setting as necessary.
UDP Port The default setting is 37778. You can modify this setting as necessary.
HTTP Port The default setting is 80. You can modify this setting as necessary.
RTSP Port The default setting is 554. The RTSP stream query format is:
Main stream:
rtsp://username:password@ip:port/cam/realmonitor?ch
annel=1&subtype=0
Sub stream:
rtsp://username:password@ip:port/cam/realmonitor?ch
annel=1&subtype=1
You are required to manually enter the following four items: Username,
Password, IP, and Port.
IP: The camera’s IP address.
Port: The default is 554. You can leave this field blank if you are using
the default value.
Follow standard RTP protocols. When the encode mode is MJPEG, the
maximum supported resolution is 2040×2040.
HTTPs Enable the HTTPs port.
HTTPs Port The default is 443.

Honeywell Performance H4D3PRV3 Specifications

General

Brand	Honeywell
Model	Performance H4D3PRV3
Category	Security Camera
Language	English