PX940 Applicator Interface Installation Instructions 5
Interfacing
This option board contains 4 connectors for a Z-Style Port, a S-Style Port, an
External Power Port, and an External Error Port.
Z-Style Port
Z-Style Port Pinouts
Port Description
Z-Style A D-Sub 15Pin receptacle connector.
S-Style A D Shaped SCSI 14Pin connector.
External Power A Mini-DIN 6Pin receptacle connector.
External Error A Mini-DIN 8Pin receptacle connector.
Pin Signal Type Description
1Signal
groud
Ground configurable for internal or external source
2 +5VDC Power Voltage supply for external sensors.
Configurable for internal or external source.
To Next Page
Loading...
