8 PX940 Applicator Interface Installation Instructions
S-Style Port
S-Style Port Pinouts
Pin Signal Type Description
1 Media out Output Goes LOW when the printer is out of media.
2Signal
ground
Ground Configurable for internal or external source.
3 Ribbon out Output
Goes LOW when the printer is out of ribbon.
4 Error Output Goes LOW during every status that keeps the
printer from printing:
• Printhead lifted
• Ribbon out
•Media out
• General print engine fault
•Front arm lifted
• Verifier calibration required
• Verifier calibration expired
• Exceed maximum barcodes
• Verifier hardware error
• Verifier failure action prompt
To Next Page
Loading...
