Honeywell QuantumT MS3580 User Manual

14
SCANNER OPERATION
Configurable Button Functions
SINGLE SCAN PATTERN
BUTTON CLICK MODE WITH CODEGATE ENABLED
For illustration purposes the unit’s primary scan pattern has been set to
all scan lines (omnidirectional reading) and the single line pattern has
been set to single-line (menu reading) with a 5 second button click
timeout configured.
1. The primary scan pattern is active when the
scanner starts.
2. To activate the single line scan pattern,
press and release the button.
3. To decode and transmit the bar code,
press and release the button.
The scanner will beep once.
4. To reactivate the primary scan pattern,
double click the button or after 5-seconds
of no-scanning the unit will automatically
reactivate the primary pattern.

Honeywell QuantumT MS3580 Specifications

General

Brand	Honeywell
Model	QuantumT MS3580
Category	Scanner
Language	English