39
CONFIGURATION MODES
The MS3580 Series scanner has three modes of configuration.
• Bar Codes
The MS3580 can be configured by scanning the bar codes included in the
Single-Line Configuration Guide or the Supplemental Configuration Guide.
The manuals are available for download at www.honeywellaidc.com.
• MetroSet2
This user-friendly Windows
®
-based configuration program allows you to
simply ‘point-and-click’ at the desired imager options. MetroSet2 is available
for download at www.honeywellaidc.com.
• Serial Programming
This mode of configuration is ideal for OEM applications. Serial
programming mode gives the end-user the ability to send a series of
commands using the serial port of the host system. The commands are
equivalent to the numerical values of the bar codes located in the
MetroSelect Single-Line Configuration Guide.
To Next Page
Loading...
