EN2R-9031 0402R15-NE 64
ORDERING INFORMATION
When ordering specify:
• Model number of CVI ignition components required: see
model number chart below.
• The correct pilot burner for the installation concerned:
refer to Honeywell ignition products guide EN0R-0038.
• Order numbers of replacement parts and accessories
required.
NOTE: Ignition controls, replacement parts and acces-
sories will be available under ”TRADELINE”
label. Ask your wholesaler for details.
NOTE: An up-to-date product survey, with details of all
new and existing products in these series, is
available. Contact your local Honeywell sales
representative for more information.
Fig. 74. Model number chart
S
456
X XXXX
Ordering Specification number
5
X
Without letter and followed by 2xxx = 1xxx +
high limit connection
D1xxx : dual spark
D2xxx : optional phase neutral independant
with high limit connection
F1xxx : flame relay for IP fan assited with
prepurge lock-out on no air (frost resist)
M : modulation on CVI
T : TTB
A : atmospheric
B : atmospheric, flame relay
C : fan assisted
D : fan assisted, flame relay
P : atmospheric, volatile lock-out
Q : atmospheric, flame relay and volatile
lock-out
R : fan assisted volatile lock-out
T : fan assisted volatile lock-out, flame relay
6 : direct spark ignition or intermittent pilot
with safety time
7 : direct burner hot surface ignition
8 : intermittent pilot
4 : Line voltage
5 : CVI system ignition control
7 : CVI system ignition control
(customer specials)
S : Residential market
To Next Page
Loading...
