86
MAN0530 Issue 10 - 11/09 Searchline Excel
2104M0506
rrrrrr Gas reading.
uuuu Measurement units.
/ This is a status character which indicates one of the following:
/ - A spinning line shows the system is operating
normally
i.e. in a fully active state.
| - A stationery line shows the system is in an inactive
state.
W - Active Warning.
F - Active Fault.
B - Beam Block.
A - Alarm
Signal Magnitude
Show the level of the sample and reference signals.The display is in the following format:
Sample: aaaaaaa
Ref: bbbbbbb
where: aaaaaaa Signal magnitude for the sample channel.
bbbbbbb Signal magnitude for the reference channel.
Dynamic Reserve
Shows the acceptable drop in signal level before beam block occurs as a percentage of the
current signal level.The display is in the following format:
Dynamic Reserve:
xxx.xx %
where: xxx.xx The acceptable drop in signal level before beam block measured as a
percentage of the current signal level.
S/W Version
Displays the system software version and the current time and date. The display is in the
following format:
Excel S/W vvVvv
hh:mm dd/mm/yy
where: vvVvv Version number of the Excel system software.
hh.mm System time as hours and minutes.
dd/mm/yy System date as day of the month, month number and the last two
digits of the year.
Note: The year 2000 is displayed as 00.
APPENDIX A - HANDHELD INTERROGATOR
To Next Page
Loading...
