Honeywell Steam Humidifier - Set the Automatic Flush Cycle Timing

GETTING
STARTED
Set the Automatic Flush Cycle Timing
• Use DIP 1 and DIP 2 to congure how often steam
humidier will automatically ush the tank.
Timing for the automatic ush is based on hours of
active heating element time.
• The home’s water hardness determines how often
automatic ushing should be performed.
• The automatic ush timing can be changed any
time after installation by setting the DIP 1 and
DIP 2 positions, as shown at left. See “Automatic
Cleaning Cycle” on page 44 for a description of
the automatic ushing process.
If water hardness is in range 1:
Honeywell recommends using the RO Filtration
system
Proceed to “Water Supply and Drain
Connections” on page 14. See “Reverse
Osmosis Filter” on page 24 to install the lter.
M29661
65432
On
Off
1
654321
654321
654321
On
Off
On
Off
For water that is filtered through
the Honeywell RO Filter System.
(30 hour flush)
For hard water without
a softener or filter.
(8 hour flush)
For water that is put through
a softener before
entering steam humidifier.
(20 hour flush)
For soft water without
a softener or filter.
(12 hour flush)
On
Off
M29614A
65432
On
Off
1
654321
654321
654321
On
Off
On
Off
For water that is filtered through
the Honeywell RO Filter System.
(30 hour flush)
For hard water without
a softener or filter.
(8 hour flush)
For water that is put through
a softener before
entering steam humidifier.
(20 hour flush)
For soft water without
a softener or filter.
(12 hour flush)
On
Off
M29614A
65432
On
Off
1
654321
654321
654321
On
Off
On
Of
f
For water that is filtered through
the Honeywell RO Filter System.
(30 hour flush)
For hard water without
a softener or filter.
(8 hour flush)
For water that is put through
a softener before
entering steam humidifier.
(20 hour flush)
For soft water without
a softener or filter.
(12 hour flush)
On
Off
M29614A
Steam Humidier System 69-2285—09 3