OPERATION
AND SERVICE
STEP TWO: Remove the Water Tank
Make sure the tank is empty. The Empty light turns on
when it is.
Turn the manual shutoff valve to the “Unlock” position.
Grip the white water valve arm and slide it back to
disengage from the tank’s black spool.
Grip the tank bottom rmly. Push down the safety
release button and pull the latch forward to
release the tank.
Note: The latch remains attached to steam humidier
and is not removed with the tank.
MCR29630
CAUTION: Scalding hazard.
Do not attempt to remove steam humidier from the mounting bracket during operation or when
the tank is full of water. The heating element could be hot when tank is removed. Failure to
comply could result in severe scalding.
Steam Humidier System 69-2285—09
46
2
3
1
To Next Page
Loading...
