Honeywell TB7100A1000 MultiPRO User Manual

11 63-2674—01
NOTE: If HEAT or COOL begins to flash, your temporary setting is at, or beyond,
the deadband. The thermostat operates based on the override setting
throughout the hold time.
3. Press NEXT.
NOTE: The ability to change settings remains for approximately seven seconds.
Once neither the temperature nor the time continue to flash, you must
restart at step 1 to make changes.
4. Use the Up and Down keys
to set the desired time for
the thermostat to resume
the programmed schedule.
NOTE: The installer setup
can limit the length
of time for an over-
ride to 1–12 hours
beyond the current
time.
5. Press CANCEL to cancel
“Hold Temperature Until” and
resume the schedule.
System & Fan
Override
More
Tue
System
Heat
M23043
Occupied
PM
Fan Auto
Hold Until

Honeywell TB7100A1000 MultiPRO Specifications

General

Brand	Honeywell
Model	TB7100A1000 MultiPRO
Category	Thermostat
Language	English