Honeywell TR80UWD - Do-Not-Disturb & Make-Up-Room; Cleaning Mode; User Interface; Backlight Brightness

39 TR80 - Installation and Operation Guide
3.6 DO-NOT-DISTURB & MAKE-UP-ROOM
Do-not-Disturb and/ Make-Up-Room functions can be enabled individually. The button on the
TR80 will be enabled only if at least one of these functions are enabled.
3.7 CLEANING MODE
It is possible to monitor if the device is currently switched to cleaning mode (Refer Cleaning
The Front Glass). This could be utilized, for example in hotel applications, to monitor if house-
keeping has already done the cleaning for a guest room.
3.8 USER INTERFACE
3. 8. 1 Backlight Brightness
Register
type
Relative
Address
Absolute
Address
Dir Name
Config
parameter
Type Range
Default
value
Input 3 30009 R DnD/MuR status - enum
0: none
1: DnD
2: MuR
0
Holding 2014 42015 R/W DnD/MuR enable 16 enum
0: disabled
1: DnD enable
2: MuR enable
3: Dnd/Mur enable
1
Register
type
Relative
Address
Absolute
Address
Dir Name
Config
parameter
Type Range
Default
value
Input 101 30102 R Cleaning mode status - enum
0: no
1: yes
0
Holding 2109 42110 R/W Cleaning mode timeout 107 secs
10-7200
secs
60 s
Register
type
Relative
Address
Absolute
Address
Dir Name
Config
parameter
Type Range
Default
value
Holding 2103 42104 R/W Backlight brightness 101 int 0-100% 100%