Honeywell TR80UWD - Holiday & Bypass Overrides; Allowed User Overrides

49 TR80 - Installation and Operation Guide
3. 10. 3 Holiday & Bypass overrides
When the user activates Holiday override, the system will remain off (or in building protection
mode) until the set time (number of days) expires.
When the user activates Bypass override, the system will remain in comfort mode until the set
time (number of minutes) expires.
When the user overrides occupancy to holiday or bypass mode and sets the desired time, the
relevant remaining time register will be set to the user selected value and displayed on the
screen (for example as scrolling text “HOLIDAY FOR 7 DAYS”). The wall module will not auto-
matically count back from the set time. It is the responsibility of the master controller to keep
time and update the remaining days/minutes in the relevant register.
3. 10. 4 Allowed User Overrides
This set of parameters determine what occupancy modes the user is allowed to select. The
allowed overrides is dependent on the current occupancy mode (holding register 1500, section
Occupancy control)
Default values allow the following overrides
Register
type
Relative
Address
Absolute
Address
Dir Name
Config
parameter
Unit Range
Default
value
Holding 2501 42502 R/W Holiday default time 501 days 1-45 or unlimited 7 days
Holding 2502 42503 R/W Bypass default time 502 mins
10-1440 mins
(or 65535 = unlimited)
180 mins
Holding 2503 42504 R/W Bypass adjust step 503 enum
0: 10 mins
1: 20 mins
2: 30 mins
3: 60 mins
2
Holding 1502 41503 R/W
Bypass remaining
minutes
- mins 0
Holding 1503 41504 R/W Holiday remaining days - days 0
Holding 2509 42510 R/W
Bypass time max 509
mins 30-1440 mins 180 mins
Register
type
Relative
Address
Absolute
Address
Dir Name
Config
parameter
Range Default
value
Holding 2504 42505 R/W Allowed overrides from OFF 504
Bit0: unused
Bit1: unused
Bit2: Allow override to
OCCUPIED
Bit3: Allow override to OFF
Bit4: Allow override to HOLIDAY
Bit5: Allow override to UNOCC
Bit6: Allow override to STANDBY
Bit7: Allow override to BYPASS
0
Holding 2505 42506 R/W
Allowed overrides from
UNOCC
505 144
Holding 2506 42507 R/W
Allowed overrides from
STANDBY
506 148
Holding 2507 41508 R/W Allowed overrides from OCC 507 176
Override mode Values
From OFF none
From UNOCCUPIED Holiday and Bypass
From STANDBY Occupied, Holiday and Bypass
From OCCUPIED Unoccupied, Holiday and Bypass