Honeywell TR80UWD - Chapter B - Configuration Parameters; List of Device Configuration Parameters

APPENDIX
B
TR80 - Installation and Operation Guide 61
CONFIGURATION PARAMETERS
List of Device configuration parameters
Config
parameter
number
Name
Type/
Unit
Range
(min-Max)
Default Notes
0 Firmware Version1 2 bytes 0-255
0-255
Firmware version: major, minor
1 Firmware Version2 2 bytes 0-255
0-255
Firmware version: bug, biult
2 ConfigId int 0-65535 0
3 ConfigDateCode 2 bytes 0-65535 0 Configuration date code
4 Modbus slave
address
int 1-120 1 Cleaning Mode Timeout
5 Port Baudrate enum 0: No function
1: Dark Mode
2: Sleep Mode
0 Power Button Function
6 Port1 Parity enum 0: °C
1: °F
0: °C Temperature display unit: °C or °F
7 Port1 StopBits C 0: not allowed
1: allowed
1 Allow temperature unit change on
device?
8 Port2 Baudrate C 0…100% %100 LCD backlight brightness in percent
9 Port2 Parity C 0 Resets some settings to default values
10 Port2 StopBits C 0-9999 0x7FFF Room Number
11 Port2 Response
Timeout
12 Dali64 sensor slave
address
int 0-247 1 0 = No DALI sensor on port 2, no
repeater function