Honeywell TR80UWD - List of UI and Access Configuration Parameters

TR80 - Installation and Operation Guide 63
List of UI and Access configuration parameters
Config
parameter
number
Name
Type/
Unit
Range
(min-Max)
Default Notes
100 Room Number int 0-9999 (or undefined
= 0x7FFF)
0x7FFF
101 LCD Backlight
brightness
% 0…100% 100%
102 Ring brightness % 0…100% 100%
103 SLEEP mode ring
brightness
% 0…100% 100%
104 Room temperature
display resolution
enum 0: don't display room
temp.
1: 1 deg resolution
2: 0.5 deg resolution
3: 0.1 deg resolution
1
105 Outdoor
Temperature display
resolution
enum 0: 1 deg resolution
1: 0.5 deg resolution
2: 0.1 deg resolution
2
106 Temperature unit &
user change option
0: °C (user can
change)
1: °F (user can
change)
2: °C (fixed)
3: °F (fixed)
0
107 Cleaning Mode
Timeout
secs 10-7200 seconds 60 sec
108 Power Button short
press function in
READY mode
enum 0: No function
1: Dark Mode
2: Sleep Mode
3:SwitchLightsOnOff
Toggle
4: SwitchLightsOn
5: SwitchLightsOff
6: Hello/Goodbye
toggle
7: Hello
8: Goodbye
2 Bits 3-8 not implemented yet
109 Power Button long
press function in
READY mode
enum same as above 0 Not implemented yet