EasyManua.ls Logo

Honeywell TrueEASE User Manual

Honeywell TrueEASE
72 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
M32930
69-2413EF-09
TrueEASE Humidification System
PROFESSIONAL INSTALLATION GUIDE
INCLUDED IN THIS HUMIDIFIER BOX
Tools needed to install humidier
Wire cutter/stripper
Tin snips or sheet metal cutter
#8 hex nut driver
Standard screwdriver
18-gauge wire (up to 5 conductor)
Other Requirements
If floor drain is not available, refer to Appendix C for
additional plumbing parts consideration.
If installed in or above a finished space, Honeywell
recommends installing a drip pan with water
sensor shut-off.
A
1
Humidifier Bypass
A
2
Humidifier Fan
Saddle valve
Water supply line
Drain hose (10 feet)
E
Owner’s manual
F
Mounting template
G
HumidiPRO Digital humidity control
Hardware (not pictured)
Additional accessories included in select
models
E
A
1
A
2
F G
GETTING
STARTED
MOUNTING PLUMBING WIRING APPENDICES
OPERATION
AND SERVICE
Cross Reference Table
Humidier Honeywell® Aprilaire® GeneralAire®
HE100 and HE150 HE225 500 570
HE200 and HE250 HE265 600 900
HE300 HE365 700 1000

Table of Contents

Other manuals for Honeywell TrueEASE

Question and Answer IconNeed help?

Do you have a question about the Honeywell TrueEASE and is the answer not in the manual?

Honeywell TrueEASE Specifications

General IconGeneral
Capacity12 gallons per day
Water Panel/FilterReplaceable water panel
DimensionsVaries by model
WeightVaries by model
Water Usage12 gallons per day
MaintenanceRegular filter replacement
Tank CapacityN/A (duct-mounted system)
Output12 gallons per day
Power Source24 VAC (typically powered by the furnace control board)
WattageVaries by model
Auto Shut-offYes

Summary

GETTING STARTED

Safety Definitions and Precautions

Key safety terms, cautions, and warnings for installation and operation.

What to Expect From Your Humidifier

Information for homeowners regarding performance, humidity levels, and maintenance.

Important Installation Requirements

Critical requirements for personal safety, mounting location, and water supply.

MOUNTING

Choosing a Mounting Method

Explains differences and requirements for Bypass vs. Fan humidifier mounting.

Mounting Location and Template

Selecting and preparing the duct location using a mounting template.

Configure Humidifier Bypass

Steps to orient the bypass outlet and adjust internal components for proper function.

Mounting Bypass Humidifier

Securing the humidifier to the ductwork using support hooks and screws.

Bypass Duct Installation

Connecting the bypass duct to the humidifier and the ductwork.

Mounting Fan Humidifier

Sliding the fan model into the duct hole and fastening it securely.

PLUMBING

Water Supply Connections

Connecting the water line to the humidifier and the main water supply.

Water Drain Connections

Steps for connecting the drain hose to the humidifier and routing it to a drain.

WIRING

Humidifier Wiring Preparation

Safety, cover removal, terminal identification, and DIP switch overview.

Transformer and Humidifier Wiring

Installing the transformer and making final wire connections to the humidifier.

Humidistat Installation

Steps for mounting the humidity controller (HumidiPRO) to the duct.

Humidistat Wiring

Wiring the humidity control to the HVAC system and outdoor sensor.

Wiring Configurations

Diagrams for advanced/basic models and outdoor sensor mounting.

Outdoor Sensor Mounting

Instructions for selecting a location and mounting the outdoor sensor.

Wiring the Outdoor Sensor

Connecting the outdoor sensor to the humidity control unit.

Humidity Control Setup

Mounting the control, checkout, calibration, and advanced installer setup.

OPERATION AND SERVICE

Startup and Checkout

Steps to ensure the humidifier is running correctly before homeowner use.

Routine Maintenance

Recommendations for annual pad replacement and cleaning.

Troubleshooting

Common problems, what to look for, and recommended solutions.

APPENDICES

Specifications

Technical details on capacity, dimensions, electrical ratings, and operating ranges.

Advanced Wiring Diagrams

Detailed wiring configurations for advanced humidifier models.

Advanced Draining Options

Illustrates various methods for plumbing the drain line.

Parts List

Identification of humidifier components with part numbers and model compatibility.

Related product manuals