Need help?Do you have a question about the Honeywell Unipoint 2306B1000 and is the answer not in the manual?
General| Brand | Honeywell |
|---|---|
| Model | Unipoint 2306B1000 |
| Category | Controller |
| Language | English |
Details and diagrams for physically mounting the controller on a DIN rail.
Guidance on selecting the correct Unipoint controller model for detector types.
Information on power supply requirements and connections for the controller.
Explanation of controller terminal connections for signals and outputs.
Compatibility of different detector types with the Unipoint controller.
Calculation method for maximum cable length for mA detectors.
Typical cable resistances and maximum loop resistance for mV detectors.
Default configuration parameters for the mV input version of the controller.
Default configuration parameters for the 4-20mA input version of the controller.
Specific steps to configure the detector input type for mA versions.
Identification of the controller's display elements and pushbuttons.
List and explanation of text codes displayed on the LCD during operation.
How the display, sounder, and relays indicate events.
Procedures for acknowledging and resetting alarms on the controller.
How the inhibit function affects controller operation and signaling.
Indication and behavior of the controller during an overrange condition.
How to initiate and what to expect from the controller's self-test routine.
Setting measurement range, units, and selecting the detector input type.
Procedures for calibrating the zero and span points of the detector and controller.
Configuring alarm set points, relay behavior, and associated delays.
How the alarm relay activation delay affects signaling and operation.
How the alarm relay off delay (hold time) affects relay release after alarm clearing.
Environmental restrictions and special conditions for safe operation.
To Next Page