Need help?Do you have a question about the Honeywell Ultrakey Lite and is the answer not in the manual?
General| Brand | Honeywell |
|---|---|
| Model | Ultrakey Lite |
| Category | Controller |
| Language | English |
Introduces the document's chapter structure and content.
Explains the meaning of specific fonts and symbols used in the manual.
Provides guidance on how to effectively use the information presented in the manual.
Provides a general description of the Ultrakey Lite and its capabilities.
Lists all the items included in the Ultrakey Lite package.
Details the technical specifications of the Ultrakey Lite hardware.
Describes the physical layout and components of the Ultrakey Lite's front panel.
Details the various ports and connection interfaces available on the Ultrakey Lite.
Explains the functionality and connections of the terminal box accessory.
Guides the user through the initial power-on and setup process.
Explains the procedure for logging into the Ultrakey Lite system.
Describes how to choose between operating modes.
Introduces the various system parameters that can be configured.
Details the configuration options for serial communication ports.
Explains how to select the serial port communication type.
Guides on setting the parity for serial communication.
Details how to configure the baud rate for serial communication.
Explains how to set the data bit configuration for serial ports.
Guides on setting the stop bit for serial communication.
Introduces the network configuration parameters.
Details the process of configuring the IP address.
Guides on setting the network gateway address.
Explains how to configure the subnet mask.
Details the process of configuring the DNS server address.
Describes how to select the user interface language.
Explains how to adjust the LCD backlight brightness.
Details settings for cascading multiple units.
Guides on how to update the slider firmware.
Describes how to perform hardware tests on components.
Provides information about firmware version and system details.
Introduces the VideoBloX mode and its functionality.
Explains how to connect the Ultrakey Lite in VideoBloX mode.
Details the system configuration steps for VideoBloX mode.
Outlines general operations when using the Ultrakey Lite.
Explains the use of numeric keys for selections.
Describes how to manage different operation modes.
Details operations specific to the Camera mode.
Explains functions related to the Monitor mode.
Describes operations for the Device mode.
Outlines functions for the Sequence mode.
Explains the usage of function keys.
Details how to control PTZ devices.
Explains how to connect the Ultrakey Lite for use with Maxpro.
Provides further diagrams for connecting to Maxpro.
Details the system configuration steps for Maxpro mode.
Guides on setting the keyboard's unique address.
Explains how to configure the baud rate for communication.
Details how to adjust joystick sensitivity.
Guides on setting the IP address for the device.
Explains how to configure the port address.
Details how to set the serial port mode.
Provides a mapping of Maxpro functions to Ultrakey Lite keys.
Guides on setting up the Ultrakey Lite for standalone operation.
Explains how to connect the Ultrakey Lite in standalone mode.
Details configuration for controlling Fusion DVRs.
Explains keyboard setup for Fusion DVR control.
Guides on selecting the type of DVR to be controlled.
Details how to connect DVRs and cameras for control.
Explains how to configure and operate PTZ devices.
Outlines general operations for controlling DVRs.
Guides on selecting which DVR to control.
Explains how to configure DVR display grids.
Details how to enable/disable auto sequence.
Explains how to manage alarm outputs.
Guides on initiating instant recording.
Explains how to display a single camera in full screen.
Guides on playing back footage in reverse.
Details how to halt playback or live view.
Explains how to play forward footage.
Guides on using the zoom function.
Details how to set date and time for searching footage.
Explains navigation keys for menu operations.
Describes the specific functions of keys F3, F4, F5, and F9.
Details configuration for controlling HRHD DVRs.
Explains keyboard setup for HRHD DVR control.
Outlines general operations for controlling HRHD DVRs.
Guides on selecting which HRHD DVR to control.
Explains how to enter numbers for passwords.
Details navigation within DVR setup menus.
Explains how to control picture display settings.
Guides on selecting cameras for display.
Explains how to manage and reset alarms.
Details how to display a camera on a spot monitor.
Explains how to initiate instant and panic recording.
Guides on switching between live monitoring and search modes.
Explains how to play back footage.
Details how to pause or resume playback.
Guides on advancing playback frame by frame.
Explains how to move backward frame by frame.
Guides on fast-forwarding playback.
Explains how to rewind playback.
Details how to zoom the picture.
Explains how to control PTZ devices via HRXD.
Introduces cascading multiple units.
Details connection methods for cascading units.
Guides on configuring master/slave settings for cascaded units.
Details direct PTZ control setup.
Explains keyboard setup for direct PTZ control.
Guides on setting PTZ name, address, and protocol.
Explains how to select cameras for control.
Outlines operational controls for PTZ devices.
Details how to control camera pan and tilt.
Explains how to zoom the camera lens.
Guides on adjusting the camera iris.
Details how to manually focus the lens.
Explains how to program and run PTZ presets.
Details PTZ call functions and protocol selection.
Guides on logging into the Ultrakey Lite via a web browser.
Introduces the web-based configuration options.
Details main system settings via web interface.
Guides on configuring standalone mode via web interface.
Details Maxpro specific settings via web interface.
Guides on configuring VideoBloX specific settings via web interface.
Explains serial port settings via web interface.
Guides on configuring network IP settings via web interface.
Details the process for upgrading firmware via web interface.
Explains how to reboot the system via web interface.
Guides on changing the system password via web interface.
Provides a mapping between Ultrakey Lite and PCKZ-CAS keyboard functions.
Details the mapping of USB keyboard keys to Ultrakey Lite functions.
To Next Page