Honeywell Ultrakey Lite User Manual

Honeywell
35
Press Seq to put the DVR output into a sequence (the sequence depends on the current
display mode and set-up). If the key is pressed again, the sequence stops (displaying the
current step in the sequence).
Press F10 to freeze the current display. Press the key again to return to the ‘live’ picture(s).
Camera selection
Press one or two of the number keys (to enter a legal camera number) followed by the Camera
key to select that number camera for full-screen display on the DVR output. This also selects
the associated DVR.
Alarm function
If an alarm is active, press Alarm to reset the output of DVR (including internal buzzer).
If the DVR is in the live monitoring mode (and no alarm is active), press the Alarm key to
display the event log. (Once in the event log, it is navigated in the same way as the menus as
detailed in ‘DVR Menus‘).
Note
If user password is enabled on the DVR, then pressing the Alarm key will
cause a user password screen to be displayed. If a user password is required,
enter the password just as ‘Number Entry’.
Spot function
To display a camera on the spot monitor, press the Monitor key, then press one or two of the
number keys (to enter a legal camera number) followed by the Camera key to select that
number camera for display on the spot monitor.
Press Monitor then Seq to put the spot monitor into a camera sequence.
Instant record & panic record
The function can toggle Instant Record on specified channel.
User can press Recycle to toggle on/off the PANIC RECORD on specified channel.
Live/Search
Press Search to bring up the ‘Search’ menu. Press the key again to exit the ‘Search’ menu.
Play
The function can make DVR playback or pause.
User can directly press Review to playback or pause.
Stop function
The function can toggle between live monitor state and pause state.
User can directly press Stop key to realize this function.
Next frame
The function can show the next frame when the DVR is in pause state.
User can rotate clockwise the finger on the slider to realize this function when DVR is in pause
state.
Previous frame
The function can show the previous frame when the DVR is in pause state.
User can rotate counter clockwise the finger on the slider to realize this function when DVR is
in pause state.

Honeywell Ultrakey Lite Specifications

General

Brand	Honeywell
Model	Ultrakey Lite
Category	Controller
Language	English