Honeywell Ultrakey Lite - System Configuration; Language; Back Light; Cascade

System Configuration
16
Figure 4-51 DNS Changed
Press Slider_Right to complete the modification.
Language
In Figure 4-12, press Slider_Right to enter the language setup menu. There are two language
options: English and French.
Figure 4-52 Language – English
Figure 4-53 Language – French
Rotate the slider to select a language and then press Slider_Right to complete the
configuration.
Back Light
In Figure 4-13, press Slider_Right and the following figure is displayed.
Figure 4-54 Back Light
Rotate the slider to change the brightness of the back light. Then press Slider_Right to
complete the configuration.
Cascade
In cascade mode, you can set the keyboard status, such as master or slave and the keyboard
IP.
In
Figure 4-14, press Slider_Right to enter Bridge Linkage menu. There are two menu items:
KBD Mode and IP Address. In KBD MODE menu, the master or slave can be set; In IP
Address menu, you can set the IP address which is the same as the Master keyboard’s IP
address.
Figure 4-55 Bridge Linkage – KBD Mode
Figure 4-56 Bridge Linkage – IP Address
Slider Update
To update the firmware of the slider, press Slider_Right in Figure 4-15 and the following figure
is displayed.