Honeywell Ultrakey Lite - Maxpro Mode; System Configuration

Maxpro Mode
24
System Configuration
Refer to “Mode Selection” on page 10 to set the mode as Maxpro.
In
Figure 4-6, press Ent and the following figure is displayed.
Figure 6-4 Loading Maxpro
If the keyboard connects the Maxpro server with Ethernet unsuccessfully, the offline menu
displays:
Figure 6-5 Maxpro Offline
If the Maxpro server sends messages to keyboard, the keyboards will display the messages in
the LCD. For example:
Figure 6-6 Fixed Camera
Press Select to enter the Maxpro Settings menu.
One of the following figures is displayed. You can switch between the items by rotating the
slider.
Figure 6-7 Keyboard ID
Figure 6-8 Baud Rate
Figure 6-9 Joystick Speed
Figure 6-10 Server IP
Figure 6-11 Server Port
Figure 6-12 ServerPortMode
Setting the keyboard address
In Figure 4-10, press Slider_Right and the following figure is displayed.