Honeywell
43
Figure 8-6 Maxpro Configuration
Keyboard ID Setting – set the ID of the keyboard (range: 1~99).
Maxpro Device Network Setting – set the IP address and port number of the Maxpro device.
Serial Port Setting – set the baud rate and connection mode of the serial port.
Joystick Speed Setting – set the joystick speed to slow or fast.
Click Apply to save the configuration; Cancel to give up the configuration; Default to restore
all default values.
VideoBloX Configuration
Click VideoBloX Configuration in the left pane and the following figure is displayed:
Figure 8-7 VideoBloX Configuration
Keyboard ID Setting – set the ID of the keyboard (range: 1~99).
VB Device Network Setting – set the IP address and port number of the VideoBloX device.
Click Apply to save the configuration; Cancel to give up the configuration; Default to restore
all default values.
To Next Page
Loading...
