Honeywell VISTA - Scene Actions and Creation; Action Categories for Devices; Steps to Create a Scene

– 21 –
Light
Choose the light option to occur upon the trigger event:
On/Off
On for Time
Door
Choose the door action to occur upon the trigger event:
Unlocks
Locks
E-mail
Select the email recipient to have a custom message sent
to, based on the triggered event.
Garage
Door
Choose the door action to occur upon the triggered event:
Opened
Closed
Water Valve
Choose the valve action to occur upon the triggered
event:
Opened
Closed
Example: You want the lights to turn on when you arrive back home and
disarm the system, but only at night.
Trigger: “when the system disarms:” Set the Trigger to Security: System
Disarm.
Condition: “only at night:” Set the TIME condition (enter the Start Time as
Sunset, by clicking “BY CLOCK” until “SUNSET” is
displayed. Repeat the same for the stop time as
“SUNRISE” )
Action: “Turn the lights ON:” Set the Action to LIGHT: ON.
Scene Buttons
ADD
DELETE
EDIT
Condition/Trigger/Action Buttons
Add
Edit
Delete
Steps To Create a Scene
1. Go to the Scene Setup menu (Automation > Scene Setup).
2. Click Add.
3. Click Scene Name; enter a name and click OK.
4. Assign the desired “Condition,” “Trigger,” and “Action” for this scene. For
each category, use the appropriate device drop-down menu to choose the
specific device(s).
5. After each selection click Save.
Creating Groups & Rooms