Honeywell Voyager 1452g Series - Wincor Nixdorf Beetle Terminal Default Settings; Wincor Nixdorf RS232 Mode a

To Next Page

To Previous Page

2 - 7

Wincor Nixdorf Beetle™ Terminal Default Settings

Scan the following Plug and Play code to program the scanner for a Wincor Nixdorf Beetle terminal. This bar code sets the

baud rate to 115200 bps and the data format to 8 data bits, no parity, 1 stop bit. The following prefixes are programmed for each

symbology:

Wincor Nixdorf RS232 Mode A

Scan the following Plug and Play code to program the scanner for a Wincor Nixdorf RS232 Mode A terminal. This bar code sets

the baud rate to 9600 bps and the data format to 8 data bits, odd parity, 1 stop bit. The following prefixes are programmed for

each symbology:

Symbology Prefix Symbology Prefix

Aztec Code V Interleaved 2 of 5 I

Codabar N MaxiCode T

Code 93 L MicroPDF417 S

Code 128 K PDF417 Q

Data Matrix R QR Code U

EAN-8 B Straight 2 of 5 IATA H

EAN-13 A UPC-A A0

GS1 DataBar E UPC-E C

GS1-128 P All other bar codes M

Symbology Prefix Symbology Prefix

Code 128 K EAN-13 A

Code 93 L GS1-128 K

Codabar N Interleaved 2 of 5 I

UPC-A A0 Plessey O

UPC-E C Straight 2 of 5 IATA H

EAN-8 B GS1 DataBar E

All other bar codes M

Wincor Nixdorf Beetle Settings

Wincor Nixdorf RS232 Mode A

Settings

Other manuals for Honeywell Voyager 1452g Series