Honeywell Voyager 1452g Series - Good Read and Error Indicators; Beeper - Good Read; Beeper Volume - Good Read; Beeper Pitch - Good Read

4 - 2
Good Read and Error Indicators
Beeper – Good Read
The beeper may be programmed On or Off in response to a good read. Turning this option off, only turns off the beeper
response to a good read indication. All error and menu beeps are still audible. Default = Beeper - Good Read On.
Beeper Volume – Good Read
The beeper volume codes modify the volume of the beep the scanner emits on a good read. Default = High.
Beeper Pitch – Good Read
The beeper pitch codes modify the pitch (frequency) of the beep the scanner emits on a good read. Default = Medium.
Trigger Click On
Beeper - Good Read Off
* Beeper - Good Read On
Low
Medium
* High
Off
Low (1600 Hz)