Honeywell Voyager XP 1472g Series User Manual

Voyager 1470/1472 User Guide 137
UPC-E0 Leading Zero
This feature allows the transmission of a leading zero (0) at the beginning of
scanned data. To prevent transmission, scan Off. Default = On.
UPC-E0 Addenda
This selection adds 2 or 5 digits to the end of all scanned UPC-E data. Default = Off
for both 2 Digit and 5 Digit Addenda.
UPC-E1
Most U.P.C. bar codes lead with the 0 number system. For these codes, use UPC-E0
(page 135). If you need to read codes that lead with the 1 number system, use the
UPC-E1 On selection. Default = Off.
* On
Off
2 Digit Addenda On
* 2 Digit Addenda Off
5 Digit Addenda On
* 5 Digit Addenda Off
UPC-E1 On

Honeywell Voyager XP 1472g Series Specifications

General

Operating Temperature	0°C to 50°C (32°F to 122°F)
Storage Temperature	-40°C to 70°C (-40°F to 158°F)
Humidity	0% to 95% relative humidity, non-condensing
Weight	210 g (7.4 oz)
Expected Charge Time	4.5 hours
Scanner Type	Area-Imaging Scanner
Connectivity	USB, RS232, Keyboard Wedge
Decode Capability	1D
Battery	2400 mAh Li-ion
Drop Specification	Designed to withstand 30 drops from 1.8 m (6 ft) to concrete
Environmental Sealing	IP42
Light Levels	0 to 100, 000 lux
Symbol Contrast	20%
Pitch, Skew	±60°, ±70°
Number of Scans	50, 000 scans per charge
Expected Duration of Operation	14 hours