11 - 13
Interleaved 2 of 5 Check Digit *No Check Char. I25CK20 7-7
Validate, But Don’t
Transmit
I25CK21 7-7
Validate, and Transmit I25CK22 7-7
Interleaved 2 of 5 Message Length Minimum (2 - 80) *4 I25MIN## 7-7
Maximum (2 - 80) *80 I25MAX## 7-8
NEC 2 of 5 Default All NEC
2 of 5 Settings
N25DFT 7-8
Off N25ENA0 7-8
*On N25ENA1 7-8
NEC 2 of 5 Check Digit *No Check Char. N25CK20 7-8
Validate, But Don’t
Transmit
N25CK21 7-8
Validate, and Transmit N25CK22 7-8
NEC 2 of 5 Message Length Minimum (2 - 80) *4 N25MIN## 7-9
Maximum (2 - 80) *80 N25MAX## 7-9
Code 93 Default All Code 93
Settings
C93DFT 7-9
Off C93ENA0 7-9
*On C93ENA1 7-11
Code 93 Message Length Minimum (0 - 80) *0 C93MIN## 7-9
Maximum (0 - 80) *80 C93MAX## 7-9
Code 93 Append On C93APP1 7-10
*Off C93APP0 7-10
Code 93 Code Page Code 93 Code Page C93DCP 7-10
Straight 2 of 5 Industrial Default All Straight 2 of 5 Industrial Settings R25DFT 7-11
*Off R25ENA0 7-11
On R25ENA1 7-11
Straight 2 of 5 Industrial Message
Length
Minimum (1 - 48) *4 R25MIN## 7-11
Maximum (1 - 48) *48 R25MAX## 7-11
Straight 2 of 5 IATA Default All Straight 2 of 5 IATA
Settings
A25DFT 7-12
Straight 2 of 5 IATA *Off A25ENA0 7-12
On A25ENA1 7-12
Straight 2 of 5 IATA Message Length Minimum (1 - 48) *4 A25MIN## 7-12
Maximum (1 - 48) *48 A25MAX## 7-12
Matrix 2 of 5 Default All Matrix 2 of 5
Settings
X25DFT 7-13
*Off X25ENA0 7-13
On X25ENA1 7-13
Matrix 2 of 5 Message Length Minimum (1 - 80) *4 X25MIN## 7-13
Maximum (1 - 80) *80 X25MAX## 7-13
Selection
Setting
* Indicates default
Serial Command
# Indicates a numeric entry
Page
To Next Page
Loading...
