Honeywell Xenon 1912 User Manual

4 - 17
Use shorter delays in applications where repetitive bar code scanning is
required. Reread Delay only works when in a Presentation Mode (see page 4-
9).
Default = Medium.
User-Specified Reread Delay
If you want to set your own length for the reread delay, scan the bar code below,
then set the delay (from 0-30,000 milliseconds) by scanning digits from the
inside back cover, then scanning Save.
Short (500 ms)
* Medium (750 ms)
Long (1000 ms)
Extra Long (2000 ms)
User-Specified Reread Delay

Honeywell Xenon 1912 Specifications

General

Brand	Honeywell
Model	Xenon 1912
Category	Barcode Reader
Language	English