2 - 6
Remote MasterMind™ for USB
When using a USB interface, you may wish to configure your scanner to com-
municate with Remote MasterMind Scanner Management Software (ReM).
Scan the ReM On bar code to communicate with ReM. To disable this capabil-
ity, scan ReM Off.
Verifone
®
Ruby Terminal Default Settings
Scan the following Plug and Play code to program the scanner for a Verifone
Ruby terminal. This bar code sets the baud rate to 1200 bps and the data for-
mat to 8 data bits, no parity bit, 1 stop bit. It also adds a line feed (LF) suffix and
programs the following prefixes for each symbology:
Symbology Prefix
UPC-A A
UPC-E A
EAN-8 FF
EAN-13 F
To Next Page
Loading...
