Honeywell Xenon 1912 User Manual

7 - 37
MSI
<Default All MSI Settings>
MSI On/Off
MSI Check Character
Different types of check characters are used with MSI bar codes. You can
program the scanner to read MSI bar codes with Type 10 check characters.
Default = Validate Type 10, but Don’t Transmit.
When Check Character is set to Validate Type 10/11 and Transmit, the
scanner will only read MSI bar codes printed with the specified type check
character(s), and will transmit the character(s) at the end of the scanned
data.
On
* Off

Honeywell Xenon 1912 Specifications

General

Brand	Honeywell
Model	Xenon 1912
Category	Barcode Reader
Language	English