Honeywell XNX User Manual

XNX Universal Transmitter Quick Start Guide
43
7 The XNX Front Panel
The XNX uses magnetic switches to enable non intrusive operation. To activate
a magnetic switch, hold the factory-supplied magnet up to the glass window and
swipe the magnet directly over the shaded area.
Figure 29. The XNX front panel display
7.1 Controls and Navigation
Control Action
✓
Enter / Accept
The Enter/Accept key is used to access menus, accept changes
and to respond “YES” to system prompts.
✖
Escape / Back
The Escape key is used to return to previous menus or to
answer “NO” to system prompts.
Move Left / Decrement Value
The Left / Decrement arrow is used to move through menu
options or decrement values when entering text or numbers.
Move Right / Increment Value
The Right / Increment arrow is used to move through menu
options or Increment values when entering text or numbers.
7.2 The General Status Screen

Figure 30. General Status screen
The General Status Screen provides a visual indication of the status of the XNX.
Warnings, faults, alarm levels and current concentration levels are displayed
continuously.

Honeywell XNX Specifications

General

Ingress Protection	IP66/67
Product Type	Universal Transmitter
Enclosure Rating	IP66/67
Display	LCD
Communication Protocols	HART, Modbus, Foundation Fieldbus
Power Supply	24 VDC nominal, 18-32 VDC
Operating Temperature	-40°C to +65°C (-40°F to +149°F)
Material	Aluminum or Stainless Steel
Gas Types	Toxic, Oxygen, and Combustible gases
Output	4-20 mA
Relays	3 programmable relays
Approvals	ATEX, IECEx, UL, CSA
Sensor Compatibility	Electrochemical, catalytic, infrared, and other sensor types