Honeywell XNX User Manual

XNX Universal Transmitter Quick Start Guide
55
8.1.8 Calibrating the 705/705HT
For more complete calibration and configuration information, see the Type 705
Operating Instructions (p/n:00705M5002).
8.1.9 Calibrating the Sensepoint/Sensepoint HT
For more complete calibration and configuration information, see the Sieger
Sensepoint Technical Handbook (p/n:2106M0502).
8.1.10 Calibrating the Searchline Excel and Searchpoint Optima Plus
Complete calibration and configuration information can be found in the Searchline
Excel Technical Handbook (p/n:2104M0506) and the Searchpoint Optima Plus
Operating Instructions (p/n:2108M0501). If properly installed and maintained,
the Searchpoint Optima Plus sensor will not require routine calibration. This
is due to the inherent stability of the IR absorption process and the unit’s fully
compensated optical configuration.

Honeywell XNX Specifications

General

Ingress Protection	IP66/67
Product Type	Universal Transmitter
Enclosure Rating	IP66/67
Display	LCD
Communication Protocols	HART, Modbus, Foundation Fieldbus
Power Supply	24 VDC nominal, 18-32 VDC
Operating Temperature	-40°C to +65°C (-40°F to +149°F)
Material	Aluminum or Stainless Steel
Gas Types	Toxic, Oxygen, and Combustible gases
Output	4-20 mA
Relays	3 programmable relays
Approvals	ATEX, IECEx, UL, CSA
Sensor Compatibility	Electrochemical, catalytic, infrared, and other sensor types