When the control handle is toggled to
the non-self-locking position once, the
left/right turn signal lamp flashes 3
times; when the control handle is
continuously toggled to the non-self-
locking position, the left/right turn
signal lamp flashes continuously until
the control handle is released.
â—¼ Turn signal lamp working conditions
The power (ignition) switch is switched to ON.
â—¼ Steering lamp and hazard warning lamp control
When the turn signal lamp is on, press the hazard warning lamp switch, the left and right
turn signal lamps flash at the same time; and press the hazard warning lamp switch
again to return to the working state of turn signal lamp.
When the power (ignition) switch is in "ON" mode, turn on the turn signal when the
hazard warning lamp is on, the turn signal lamp will work and the hazard warning lamp
will stop working; turn off the turn signal lamp and return to the hazard warning lamp
working state.
To Next Page
Loading...
Need help?
General