4-3.Operating lights and wipers
Headlamp ON/OFF
144
4-3.Operating ligh ts and wipers
Headlamp ON/OFF
The headlamps (low beams) and all
the following lamps are illuminated.
The front position lamp, rear
position lamp, license plate lamp
and instrument panel backlight are
illuminated.
The headlamp (low beam), position
lamp, license plate lamp and
instrument panel backlight
automatically come on and go off.
When the headlamps (low beams) is
on, push the light control handle
forward to turn on the high beams; pull
the handle back to the original position
to turn off the high beams.
Pull the light control handle backward
to turn on the high beams; release the
light control handle to turn off the high
beams.
◼ Daytime driving lamp system
To make your vehicle more visible to other drivers during daytime driving, the daytime
driving lamp will automatically turn on whenever the power (ignition) switch is set to ON
mode and the position lamps are off.
To Next Page
Loading...
Need help?
General