7-3. Self-maintenance
Checking and replacing the fuse
332
Checking and r eplacing the fuse
If any electrical component is not working, a fuse may have blown. In this case,
check and, if necessary, replace the fuse.
Turn off the power (ignition) switch.
The fuse is located in the following position. Follow the instructions below to
check the fuse.
◼ Engine compartment (type A)
Press the retaining clip to open the cover.
◼ Engine compartment (type B)
Press the retaining clip to open the cover.
◼ Engine compartment (type C)
Press the retaining clip to open the cover.
To Next Page
Loading...
Need help?
General