Hoymiles HMT-2250-6T User Manual

206
Input port 3&4
overvoltage
1.Please make sure that the PV module open-circuit voltage is less
than or equal to the maximum input voltage.
2. If the PV module open-circuit voltage is within the normal range,
contact your dealer or Hoymiles technical support.
215
Input port 5&6
overvoltage
1.Please make sure that the PV module open-circuit voltage is less
than or equal to the maximum input voltage.
2. If the PV module open-circuit voltage is within the normal range,
contact your dealer or Hoymiles technical support.
207
Input port 1&2
undervoltage
1.Please make sure that the PV module open-circuit voltage is less
than or equal to the maximum input voltage.
2. If the PV module open-circuit voltage is within the normal range,
contact your dealer or Hoymiles technical support.
208
Input port 3&4
undervoltage
1.Please make sure that the PV module open-circuit voltage is less
than or equal to the maximum input voltage.
2. If the PV module open-circuit voltage is within the normal range,
contact your dealer or Hoymiles technical support.
216
Input port 5&6
undervoltage
1.Please make sure that the PV module open-circuit voltage is less
than or equal to the maximum input voltage.
2. If the PV module open-circuit voltage is within the normal range,
contact your dealer or Hoymiles technical support.
209 Port 1 No input
1. Please conrm whether this port is connected to the PV module;
2. If the PV module is connected, please check the DC cable
connection between this port and the PV module.
210 Port 2 No input
1. Please conrm whether this port is connected to the PV module;
2. If the PV module is connected, please check the DC cable
connection between this port and the PV module.
211 Port 3 No input
1. Please conrm whether this port is connected to the PV module;
2. If the PV module is connected, please check the DC cable
connection between this port and the PV module.
212 Port 4 No input
1. Please conrm whether this port is connected to the PV module;
2. If the PV module is connected, please check the DC cable
connection between this port and the PV module.
217 Port 5 No input
1. Please conrm whether this port is connected to the PV module;
2. If the PV module is connected, please check the DC cable
connection between this port and the PV module.
218 Port 6 No input
1. Please conrm whether this port is connected to the PV module;
2. If the PV module is connected, please check the DC cable
connection between this port and the PV module.
213
PV-1 & PV-2
abnormal wiring
Please check whether the DC connections on port 1 and 2 are
correct.
214
PV-3 & PV-4
abnormal wiring
Please check whether the DC connections on port 3 and 4 are
correct.
219
PV-5 & PV-6
abnormal wiring
Please check whether the DC connections on port 5 and 6 are
correct.
© 2020 Hoymiles Power Electronics Inc. All rights reserved.
14
Three-phase Microinverter HMT-1800/2250 Troubleshooting

Hoymiles HMT-2250-6T Specifications

General

Model	HMT-2250-6T
Category	Inverter
Max. Output Power	2250 W
Number of MPPTs	6
Efficiency	96.5%
Peak Power Tracking Voltage Range	16-60 V
Startup Voltage	22 V
Rated Output Power	2250 W
Rated Output Current	9.78A
Nominal Output Voltage/Range	230 V
Rated Output Voltage	230 V
Output Frequency	50/60 Hz
Cooling Method	Natural Convection
Protection Level	IP67
Maximum Input Current	12A
Ambient Temperature Range	-40°C to +60°C
Operating Temperature Range	-40°C to +60°C