7. Decommissions
7.1 Decommissions
Disconnect the inverter from DC input and AC output; remove all connection cable from the Microinverter; remove
the Microinverter from the frame.
Please pack the Microinverter with the original packaging, or use the carton box that can afford 5kg weight and can be
fully closed if the original packaging is no longer available.
7.2 Storage and Transportation
Hoymiles packages and protects individual components using suitable means to make the transport and subsequent
handling easier. Transportation of the equipment, especially by road, must be carried out by suitable ways for protect-
ing the components (in particular, the electronic components) from violent, shocks, humidity, vibration, etc. Please
dispose the packaging elements in appropriate ways to avoid unforeseen injury.
It is the customer’s responsibility to examine the condition of the components transported. Once receiving the Micro-
inverter, it is necessary to check the container for any external damage and verify receipt of all items. Call the deliv-
ering carrier immediately if damage or shortage is detected. If inspection reveals damage to the inverter, contact the
supplier, or authorized distributor for a repair/return determination and instructions regarding the process.
The microinverter storage temperature is -40
℃
~ +85
℃
.
7.3 Disposal
• If the equipment is not used immediately or is stored for long periods, check that it is correctly packed. The
equipment must be stored in well-ventilated indoor areas that do not have characteristics that might damage
the components of the equipment.
• Take a complete inspection when restarting after a long time or prolonged stop.
• Please dispose the equipment properly after scrapping, which are potentially harmful to the environment, in
accordance with the regulations in force in the country of installation.
© 2020 Hoymiles Power Electronics Inc. All rights reserved.
19
Three-phase Microinverter HMT-1800/2250 Decommissions
To Next Page
Loading...
Need help?
General
