Hoymiles HMT-2250-6T User Manual

2.2 Explanation of Symbols
Symbol Usage
Treatment
To comply with European Directive 2002/96/EC on waste Electrical and Electron-
ic Equipment and its implementation as national law, electrical equipment that has
reached the end of its life must be collected separately and returned to an approved re-
cycling facility. Any device no longer required must be returned to an authorized dealer
or approved collection and recycling facility.
Caution
Do not come within 8 inches (20cm) of the microinverter for any length of time while it is
in operation.
Danger of high voltages
Danger to life due to high voltage in the microinverter.
Beware of hot surface
The inverter can become hot during operation. Avoid contact with metal surfaces during
operation.
CE mark
The inverter complies with the requirements of the Low Voltage Directive for the Euro-
pean Union.
Read manual rst
Please read the installation manual rst before installation, operation and maintenance.
© 2020 Hoymiles Power Electronics Inc. All rights reserved.
05
Three-phase Microinverter HMT-1800/2250 About Safety

Hoymiles HMT-2250-6T Specifications

General

Model	HMT-2250-6T
Category	Inverter
Max. Output Power	2250 W
Number of MPPTs	6
Efficiency	96.5%
Peak Power Tracking Voltage Range	16-60 V
Startup Voltage	22 V
Rated Output Power	2250 W
Rated Output Current	9.78A
Nominal Output Voltage/Range	230 V
Rated Output Voltage	230 V
Output Frequency	50/60 Hz
Cooling Method	Natural Convection
Protection Level	IP67
Maximum Input Current	12A
Ambient Temperature Range	-40°C to +60°C
Operating Temperature Range	-40°C to +60°C