2-4
Using the ProCurve Web Browser Interface
Navigating the Web Browser Interface
Using the ProCurve Web
Browser Interface
TRUNKS 2-17
Membership Selects ports to group into static trunks. 2-17
Configuration Configures static trunk connection settings. 2-20
LACP Setup Configures Link Aggregation Control Protocol (LACP) on
the switch.
2-21
LACP Status Displays aggregation information and LACP port status. 2-23
VLANS 2-25
VLAN Setup Create up to 64 VLANs. 2-25
VLAN Port Config Configures VLAN behavior for individual ports and
trunks.
2-27
LLDP 2-30
Configuration Configures Transmitted TLVs settings and LLDP state. 2-30
Neighbor Monitors LLDP neighbor information. 2-32
SNMP 2-33
Configuration Configures the Simple Network Management Protocol. 2-33
DIAGNOSTICS 2-34
Ping Test Sends a ping to other devices from the switch. 2-34
Factory Defaults Force the switch to perform a power reset and restore
the original factory settings.
2-35
Reboot Switch Reboots the switch. 2-36
SUPPORT 2-37
Configuration File Upload or download the switch configuration file. 2-37
Support File Download the switch system configuration and status
information in text file format.
2-38
Update Software Updates the switch system software using a file
provided by ProCurve.
2-38
ProCurve Web Site Link to ProCurve Web site. 2-39
LOGOUT Quits to the Login page.
Menu Description Page
To Next Page
Loading...
Need help?
General