1-1
1
Getting Started
Introduction
This Management and Configuration Guide is intended to support the
following switches:
■ ProCurve Switch 1800-8G
■ ProCurve Switch 1800-24G
This guide describes how to use the Web browser interface to configure,
manage, and monitor switch operation. A troubleshooting chapter is also
included.
Related Publications
Installation and Getting Started Guide. Use the Installation and Get-
ting Started Guide shipped with your switch to prepare for and perform the
physical installation. This guide also steps you through connecting the switch
to your network and assigning IP addressing, as well as describing the LED
indications for correct operation and trouble analysis.
You can download a copy of this guide from the ProCurve Web site,
http://www.hp.com/go/procurve. (See “Getting Documentation From the Web” on
page 1-2.)
Release Notes. Release notes are posted on the ProCurve Web site and
provide information on new software updates:
■ New features and how to configure and use them
■ Software management, including downloading software to the switch
■ Software fixes addressed in current and previous releases
To view and download a copy of the latest release notes for your switch, see
“Getting Documentation From the Web” on page 1-2.
To Next Page
Loading...
Need help?
General