To Next Page

To Previous Page

2-13

Installing the Switch

Installation Procedure

4. Connect the Switch to a Power Source

1.) For the 1810-24 and 1810-24G Switch, plug the included power cord into

the switch’s power socket and into a nearby AC power source.

For the 1810-8 and 1810-8G Switch, plug the AC/DC adapter’s power cord

into the switch, and then plug the AC/DC power adapter into a nearby AC

power source.

2.) Re-check the LEDs during self test. See “Self Test LED Behavior” on

page 2-7.

3. For the 1810-8 and 1810-8G Switch, use the included cable tie to secure

the power cord to the switch.

Other manuals for HP 1810-8G

Questions and Answers:

Need help?

Do you have a question about the HP 1810-8G and is the answer not in the manual?

General