To Next Page
B
brownbrandonAug 17, 2025
What to do if the HP Storage controller back panel Fault/Service Required LED is amber?
- WWilliam CervantesAug 18, 2025
If the controller back panel Fault/Service Required LED is amber, it could indicate a hardware-controlled power-up error, in which case you should restart the controller from the other controller using SMU or the CLI. Alternatively, it might be a cache flush error, suggesting you remove and reinsert the controller. If it is a cache self-refresh error, contact an authorized service provider for assistance. In some cases, replacing the controller may be necessary.
General
