HP 2520-8

3-16
IPv6 Management Security Features
Secure Shell (SSH) for IPv6
Note For both IPv4 and IPv6, the switch supports only SSH version 2. You cannot
set up an SSH session with a client device running SSH version 1.
For more information on how to configure SSH for encrypted, authenticated
transactions between the switch and SSH-enabled client devices, refer to the
“Configuring Secure Shell (SSH)” chapter in the Access Security Guide for
your switch.
The listen parameter is available only on switches that
have a separate out-of-band management port. Values
for this parameter are:
• oobm — inbound SSH access is enabled
only on the out-of-band management port.
• data — inbound SSH access is enabled only
on the data ports.
• both — inbound SSH access is enabled on
both the out-of-band management port and
on the data ports. This is the default value.
Refer to Appendix I, “Network Out-of-Band Manage-
ment” in the Management and Configuration Guide for
more information on out-of-band management.
The listen parameter is not available on switches that
do not have a separate out-of-band management port.