HP 280 G2 - Rear Panel Components; Serial Number Location

Rear panel components
Item Component Item Component
1 RJ-45 Network Connector 6 Line-In Audio Connector (blue); Line-In
Audio Connector (blue)
2 USB 2.0 Ports (2) 7 Power Cord Connector
3 DVI-D Monitor Connector 8 Security Lock Slot
4 VGA Monitor Connector 9 USB 2.0 Ports (2)
5 USB 3.0 Ports (2)
NOTE: An optional second serial port and an optional parallel port are available from HP.
When a device is plugged into the blue Line-In Audio Connector, a dialog box will pop up asking if you want to use the
connector for a line-in device or a microphone. You can recongure the connector at any time by double-clicking the
Audio Manager icon in the Windows taskbar.
When a graphics card is installed in one of the system board slots, the video connectors on the graphics card and/or
the integrated graphics on the system board may be used. The specic graphics card installed and software
conguration will determine the behavior.
The system board graphics can be disabled by changing settings in Computer Setup.
Serial number location
Each computer has a unique serial number and a product ID number that are located on the exterior of the
computer. Keep these numbers available for use when contacting customer service for assistance.
Rear panel components 3