HP 280 G4 MT - Rear Panel Components

Rear panel components
Item Component Item Component
1 Line-Out audio connector 8 USB 2.0 Type-A ports (2)
2 Line-In audio connector (blue) 9 RJ-45 network connector
3 HDMI connector 10 Graphics card
4 Serial port 11 Security lock slot
5 VGA monitor connector 12 Access panel thumb screw
6 USB 2.0 Type-A ports (2) 13 Power cord connector
7 USB 3.x SuperSpeed ports (2)
NOTE: An optional second serial port and an optional parallel port are available from HP.
When a device is plugged into the blue Line-In audio connector, a dialog box will pop up asking if you want to use the
connector for a line-in device or a microphone. You can recongure the connector at any time by double-clicking the
Audio Manager icon in the Windows taskbar.
When a graphics card is installed in one of the system board slots, the video connectors on the graphics card and/or the
integrated graphics on the system board may be used. The specic graphics card installed and software conguration
will determine the behavior.
The system board graphics can be disabled by changing settings in Computer Setup.
Rear panel components 3