HP 3465B - Test Equipment Required

T
Section V Model 3465B
Table 5-1. Test Equipment Required.
INSTRUMENT TYPE
REQUIRED CHARACTERISTICS RECOMMENDED MODEL
Digital Volt/Ohmmeter
DC Volts: 1 V, 10 V and 100 V range
Accuracy: ± 0.04%
Input Resistance: 10 Mn
Ohms: 200 kO
Accuracy: ± 0.07%
-hp- 3470 System;
-hp- 34702A Multimeter
Digital Voltmeter DC Volts: 5 digit resoiution to 1 /tV on
100 mV dc range.
Accuracy: ± 0.007%
AC Volts: 1 V and 10 V range
Frequency; 40 Hz to 20 kHz
Accuracy: 0.25%
-hp- 3450B
AC Calibrator/ High
Voltage Amplifier
Frequency: 20 Hz to 100 kHz
Output: 1 mV to 1000 V
Accuracy (mid band): ± 0.1%
-hp- 745A/746A
DC Standard
Output: 1 mV to 1000 V
Accuracy: + 0.02%
-hp- 740B
Meter Calibrator
Output: 1 A
Accuracy: ± 0.1 %
-hp- 6920B
Electronic Counter
Frequency: 50 and 60 Hz
Accuracy: ±0.01%
-hp- 5300A/5302A
Power Supply Output: 20 V, 1 A
-hp- 6294A
Resistor Decade Box 10 SI, 100 SI, 1 kO, 10 kO, 100 kO
and 1 MO steps
Accuracy; ± 0.005%
General Radio
Mdl GR 1433-Z
Capacitor
1 mF ± 10%
0160-3407
Resistors
1 SI ± 0.02%
10 0+ 0.01%
1 kO ± 0.01%
10 kO ± 0.01%
100 kO ± 0.01%
1 MO ± 0.01%
10 MO ± 0.1%
22 kO ± 1 %
G.R. 1440-9601
G.R. 1440-9611
G.R. 1440-9631
G.R. 1440-9641
G.R. 1440-9651
G.R. 1440-9661
0698-8194
0757-1087
5-0