HP 3PAR StoreServ 7450 - Ethernet Leds; Node FC and CNA Port Leds

Table 6 Controller Node LEDs (continued)
FaultOnAmberFault
No faultOff
Node in cluster and there is a faultFlashing
Ethernet LEDs
The controller node has two built-in Ethernet ports and each includes two LEDs:
• MGMT — Eth0 port provides connection to the public network
• RC-1 — designated port for Remote Copy functionality
Figure 10 Ethernet LEDs
Table 7 Ethernet LEDs
1 Gbe LinkOnGreenLink Up SpeedLeft LED
100 Mbit LinkOnAmber
No link established or 10 Mbit LinkOff
No link activityOnGreenActivityRight LED
No link establishedOff
Link activityFlashing
Node FC and CNA Port LEDs
The controller node has two onboard FC ports; each includes two LEDs. The arrow head-shaped
LEDs point to the port they are associated with.
NOTE: Incorrectly configured interconnect cables illuminate amber port LEDs.
Controller Node and Internal Component LEDs 15